One of the fastest methods to bring new life to an old chunk of furniture is to color it. As we've all probably learned over time though, painting specific things with a brush just isn't a smart idea. It can leave uneven marks and show brush strokes that may actually belittle the standard of your piece. While some folks are scared of it, spray painting can basically be a good way to achieve a clean and professional finish. If you have tried it in the past only to be had a meeting with frustrating runs, globs and splotches, try these steps and spray your way to a brandnew, factory quality finish on your work over old furniture pieces. New life is only a spray away.

Tip: watch pictures of how a professional painter gets results at schilderwerken

Before you even take the lid of off the can of spray paint, you need to make sure that the surface which you are painting is prepared to accept the paint. This means that it needs to be clean of all dirt, grease, dirt, food, and so on. The most effective way to get it cleaned up is to use an all-purpose household cleaner and a rag. Wipe the surface down well and then allow it to dry. After you are assured that it's clean, use a chunk of steel wool to buff any remaining gloss offof the outside of the existing finish. This step will ensure that your new layers of paint are able to stick very well. Paint bonds to adull finish much better than it does to a glossy one.

The really painting process is where a lot of people end up making howlers, and this is what can make your project look shoddy. You don't want runs, drips or blobs of paint, so that the trick is to apply extraordinarily thin coats. You should be ready to see through the 1st coat after you apply it. If you are feeling like you may be putting on too much paint, then you definitely are. The key is to not get the nozzle of the spray can to close to the surface. Hold it about 12 inches away and start out using short bursts until you get comfortable with the amount of paint that's released by the nozzle. Remember, it is far easier to add more paint later than it is to get rid of paint once youhave applied too much.

If you do apply to much, you'll know terribly soon, as itwill begin to run or to sag. If you see this problem developing you must address it immediately! Use your finger the smooth out the run. This can smear the work that you have done so far, but it's's simply covered up by extra thin coats. Remember, when spray painting, think thin!

When you are doing your furniture, why not refreshing your garden? To get some ideas, have a look at graszoden