January 30, 2012
Do the Extension Springs in Your Garage Door Need Repair?
If something goes wrong with the springs fitted in your garage door, then you may be tempted to call a professional repair man to your home to fix the problem. However, with a little know-how and the right mind set, you may just realize the essence of your capabilities. Before you set out to replace the extension springs in your garage door, read this article first.
Tools:
• Vice Grips
• Work Gloves
• Screw Drivers
• Safety Goggles
Step 1 – The first thing you need to do is put your gloves and goggles on. You can seriously injure yourself if you're not careful when working with these springs, so make sure that you're cautious. Make sure that you always take appropriate safety precautions.
Step 2 – It's important to replace springs in pairs, even if you feel the other one is in good condition. If you're having problems with one spring, then you will likely have problems with the other one in the not too distant future. While you're working with one of the springs now, you might as well get the other one out of the way.
Step 3 – Get your door in the lifted position, all the way to the top of the tracks. You should fit your vice grips on both tracks to keep the wheels locked in place.
Step 4 – Your next step will be unhooking each spring. There will be a significant amount of tension in springs that are still hooked up. Remove the spring carefully by pulling down on the bottom or alternatively pulling up on the top.
Step 5 – You will need to call around to see who has the parts that you need. You can have someone order the springs that you need if they don't already have them in stock.
Step 6 – After you have the springs in hand, then you can set out to install them. You should install the bottom part of the spring first so that you can pull it up to a point in which you're able to attach the top part.
Step 7 – Once you have installed the springs in the proper place, take the vice grips off of the door and test everything out to see if it's working properly. Inspect your work for any strange noises, and to make sure all parts are working properly. If you find that there are additional issues with the unit, you may find it in your best interest to call a professional technician for servicing. Doc No. 34Sdlhgsdl -sds
Kristie Brown writes on a variety of topics from health to technology. Check out her websites on Garage doors waukesha and Garage doors west bend
Leave a Comment